proiiievo2017_face
The new PRO that offers you much more ? That’s the PROIIIevo !
The PROIIIevo, this is the result of over 20 years experience focusing technology, know-how and strength to give birth to the most reliable data acquisition system on the market.
The PROIIIevo consists of 11 LEDs and 4 buttons, each button is associated with a menu. After activation, the PROIIIevo displays the home page which is the main window. It is from this window that the system can activate Bluetooth, enter race mode and allow access to all menus and customize the settings and display the recorded data.
The PROIIIevo :
  • 11 LEDs , pixilated display, adjustable backlight.
  • The display and logging of partial times and total times for each lap. These laptimes can be made magnetic, infrared, as well as GPS if the PROIIIevo is provided with a GPS module.
  • The engine speed (RPM).
  • The speed that can now be achieved with a directly connected sensor to PROIIIevo, installed on the rear or front axle and this without having to go through an external module. This solution also displays the gearbox ratios during the race.
  • 2 temperatures : water/spark plug and exhaust gas.
  • And finally the possibility of connecting one of our modules that will allow you to further increase considerably the features of your PROIIIevo.
  • The data can be downloaded either via USB cable or through Bluetooth of external module
  • Hermetic to water projections (IP56).
  • Display dimensions : (mm/pixel) : 75×45 / 160×94.
  • Weight : 434 gr.
The compositions “with options” most used(1) The PROIIIevo + a water temperature sensor0139(2) The PROIIIevo + a water temperature sensor with the extension , in order to facilitate engine removal. (3) The PROIIIevo + a water temperature sensor with the extension and a speed sensor with a magnetized ring. This solution displays accurately the speed and displays the gearbox ratio engaged during the race. If you set the maximum RPM limit of your engine on the three white LEDs , very powerful, it will tell you with high precision the right time to engage a gear.(4) The PROIIIevo + 2 temperature sensors : water+exhaust with Y extension and a speed sensor with magnetized ring. This solution displays accurately the speed and displays the gearbox ratio engaged during the race. If you set the maximum RPM limit of your engine on the three white LEDs , very powerful, it will tell you with high precision the right time to engage a gear.Infrared Receiver Installation for taking times.Alone :
With a speed sensor :04180183External power suppliesPower supply with battery in Lithium Ion 3.7 Volts – 4.400mAh. Art. A40050156Power with Vehicle Battery 12 Volts. Art. A40040155Greatly increase the capacity of your PROIIIevo
Modules GPS1i0494
  • Integrated GPS (10Hertz) : it allows to draw the trajectory in the APP and to display speed on the PROIIIevo
  • Integrated Bluetooth (Android/PC/iOS) : it allows to download the data and to update your PROIIIevo
 
0505
Module GPS4i0113
  • Integrated GPS (10Hertz) : it allows to draw the trajectory in the APP and to display speed on the PROIIIevo
  • Integrated Bluetooth (Android/PC/iOS) : it allows to download the data and to update your PROIIIevo
  • Integrated G-Force : registers longitudinal and lateral gravitational forces
  • Input BUS (black) : to connect the module to your PROIIIevo
  • Input USB (grey) : to download data and to update your PROIIIevo
  • Input (red) : to connect up to 2 temperature sensors (by adding 1x hub-2 adaptor ref A2190), note that you can replace a temperature sensor with a Lambda sensor
  • Input (blue) : to connect up to 2 speed sensors (by adding 1x hub-2 adaptor ref A2191)
 
KART avec PRO3EVO et GPS4.286
Possible configuration
0511
 
Module GPS4Vi
0114
“PROFESSIONAL SOLUTION”
  • Integrated GPS (10Hertz) : it allows to draw the trajectory in the APP and to display speed on the PROIIIevo
  • Integrated Bluetooth (Android/PC/iOS) : it allows to download the data and to update your PROIIIevo
  • Integrated G-Force : registers longitudinal and lateral gravitational forces
  • Input BUS (black) : to connect the module to your PROIIIevo
  • Input USB (grey) : to download data and to update your PROIIIevo
  • input (brown) : to connect up to 3 position sensors, accelerator pedal, brake pedal and steering wheel, (by adding 1x hub-3 adaptor, ref A2199)
  • Input (blue) : to connect up to 2 speed sensors (by adding 1x hub-2 adaptor ref A2191)
 
0504
Possible configuration
0510
Download here the technical file for the installation of position sensors
DOWNLOAD
 
Les APPs
ALFANO began a new era with the development of applications on Smartphones and Tablets, more practical, more intuitive, more modern. Download our applications, real data examples are included therein.
View more details about our APP